Full Firmware G925FXXU6ESG2

How To Flash 

How To Flash G925F

• Download and install Samsung Driver USB.
• Download the Odin tool and then extract it.
• Download the Firmware and extract it.
• Download Pit file G925F depending on the problem of the device you have in case there are no problems in flashing do not use the file.
• Open odin tool And from the BL box we choose the file BL=BL / AP=AP / CP=CP / CSC=CSC.
• Now boot the device into download mode with Volume Down+Home+Power.
• Connect the device to the computer and press Start.
• The process will take a few minutes so be patient and never disconnect the cable.
• After the flash is finished, the device will automatically restart.
• It will take about 10 minutes to boot the Android device so don't worry.
• After the boot process is finished, the Setup Wizard will appear.
• Complete the settings, Congratulations on successfully flashing the device.